Products name: 3M Protective Goggle
Model: 1621AF(Clear Anti-Fog Lens, Anti-Splash).
Production place: China.
Quality: ANSI Z87.1-2015 Standard/GB 14866-2006
Key word: Safety Economy
THIS WARNING LABEL TO BE READ&REMOVED BY WEARER ONLY
THIS PRODUCT IS NOT DESIGNED FOR AND SHOULD NOT BE USED IN SIMULATED CMBAT GAMES.
THIS PRODUCT DOES NOT MEET MILITARY IMPACT REQUIREMENTS OF MIL-STD-662F OR MIL-V-43511C.
This goggle provides limited protection only. Misuse or failure to follow warnings and instructions may result in serious personal injury, including blindness or death. For proper use, see supervisor, instructions and warnings, or call 3M OH&ESD Technical Service, 1-800-2243-4630.
The lens(es)in this goggle is /are impact resistant but not unbreakable. Pitting or scratching of these lens(es) reduce their impact resistance and visibility. For your protection, pitted or scratched lens(es) must be replaced immediately or covered with appropriate eye protection until a replacement can be made. TO PREVENT SERIOUS INJURY, INCLUDING BLINDNESS, CHECK WITH YOUR SAFTEY OR SUPERVISORY PERSONAL TO BE SURE YOU ARE WEARING APPROPRIATE EYE PROTECTION. SELECTION OF ANY PROTECTIVE DEVICE MUST BE IN ACCORDANCE WITH ANSI Z87.1-2015 and GB 14866-2006.
Protective goggle frames and lens(es) are not unbreakable. They do not provide adequate protection against severe impacts such as explosions, fragmenting grinding or abrasive wheels. These protective goggles should not be worn to provide protection from, among other hazards, sports and lasers. Do not use these lens(es) for operations that expose your eyes to harmful levels of optical radiation such as burning, cutting or welding with torches, electric(arc) welding, furnace or molten metal operations, glass blowing. Goggles with indirect(covered) vents may be more appropriate for splash and dust hazards.
This device meets the High Impact requirements of ANSI Z87.1-2015 and GB 14866-2006
Clean goggle lens(es) with a soft cloth for clearer visibility.